background image

- 2 -

SYMBOLS

 

The following symbols are used in this instruction manual, or 

appear on the device, accessories and packaging.

To assure correct use of the device, basic safety measures should 

always be followed including the warnings and cautions listed in 

this instruction manual.

DO NOT use this device on newborns, infants, children, 

toddlers or persons who cannot express their intentions.  The 

device is designed for use on adults only.

DO NOT self-diagnosis from the measurement results and 

start treatment by yourself.

DO NOT adjust medication based on the measurement results.

Consult your physician for specific information about your 

blood pressure.

The Irregular Heartbeat detection function may help to detect 

potential cardiac arrhythmia at an early stage but it is not 

intended to replace cardiac examination.

The “WHO Blood Pressure Classification” chart is a guide for 

reference and is not intended to replace medical diagnosis.

Use the device only as intended.  Do not use the device for 

any other purpose.

Do not apply the device on an arm with an unhealed wound or 

under medical treatment.

Do not take measurements more than necessary. High 

measurement repetition rates may cause pain, numbness, 

temporary red marks or bruising to the arm due to blood flow 

interference.

IMPORTANT NOTES

    Symbols 

Function / Meaning

 

WARNING / ATTENTION

 

Indicates a potentially hazardous situation which, if 

                         not avoided, could result in death or serious injury.

 

PRECAUTION / IMPORTANT INFORMATION

        SN 

Serial Number

 Manufacturer

 

Type BF: Device, cuff and tubing are designed to 

                          provide special protection against electrical shocks.

       SYS 

Systolic Blood Pressure in mmHg

       DIA 

Diastolic Blood Pressure in mmHg

       PUL Pulse

 

    EC Directive Medical Device Label

 

    WEEE Label

 

    Refer to instruction manual / booklet

 

    Keep dry

Summary of Contents for MD2520


























Reviews: