background image

- 7 -

BATTERY INSTALLATION

 

1. Remove the battery cover.

2. Remove the used batteries and insert new batteries.

        Use LR06 / AA alkaline batteries. 

        Make sure the battery polarities (+) and (-) match the markings 

        on the battery compartment. 

3. Close the battery cover.

Battery Level Indicator

        symbol on the display indicates that battery level is normal.

When battery level is getting low,         symbol and “E6” will appear 

on the display.  Replace all used batteries with new batteries.

NOTE:

        Batteries may cause a choking hazard to children.  Store the 

        batteries out of the reach of children.

        In case battery fluid leaks, do not touch the battery fluid.  Avoid 

        skin contact (e.g. put on protective gloves) and clean the battery 

        compartment with dry cloth.

        Remove the batteries from the battery compartment if the device 

        will not be used for a long period.

        Use only 1.5V alkaline batteries.  Do not use other types of 

        battery such as rechargeable battery.  This may damage the 

        device.

        Replace all batteries at the same time.  Do not mix used and new 

        batteries.  Use same brand and model of batteries is 

        recommended.  

        Battery life may vary with ambient temperature and may be 

        shorter at low temperature.

Summary of Contents for MD2520


























Reviews: