© Preisler & Partner | UAVshop.co.uk
C
heCk
m
oTor
r
oTaTion
d
ireCTion
Once the DIP switches are set, activate the quad and carefully check that the propeller ro
-
tation is as shown. Turn on your Tx with the throttle at minimum, and power the flight cont
-
roller. Open the throttle just enough that the motors begin to turn, and check the direction
of rotation of each motor. You should always do this BEFORE you fit the propellers, and be
careful not to use high throttle on the motors when no prop is fitted, or you risk damage to
your motors. In order to change the direction of rotation of a motor, simply swap any two
leads between the ESC and the motor.
21
