© Preisler & Partner | UAVshop.co.uk
i
nsTall
esC
s
and
p
ower
d
isTribuTor
After soldering the 4 arms, install the
4 ESCs by connecting the 3 output
wires to the motor wires. At this stage, connect any of
the three wires from the ESC to any wire on the motor,
don’t worry about the motor rotation direction.
Run both the ESC servo leads and the power supply
leads to the middle fuselage.
Connect the power leads to the power splitter lead and
exit the Deans Plug through the bottom frame plate.
18
back to Index
