FXO H.323 Gateway User Manual
Document Ver.: 118a
Release Sep, 2004
78
2. If Gateway is configured as
Terminal Type
, each line will register to
GK with it’s own number, prefix number is not needed.
3. No matter in GK or P2P mode, user only needs to dial line number to
reach the local port.
For example, in P2P mode, user wants to dial from
FXS TEL1 to FXO Line1, only need to dial number of line2.
-passwd
set H.235 security password. If user’s GK need H.235
security token password to authenticate, user have to input
topen password in this command. (please refer to your
retailer of GK for information about token password if they
implement this function in their GK)
-alias
H.323 ID. If in gatekeeper mode, this h.323 ID must be
different from others who are registering to the same
gatekeeper.
-display
An addition name for special application if the calling party
needs this to recognize the called party.
-gkid
set GateKeeper name for GateKeeper discovery. When
Gateway send out GateKeeper discovery message will
search GateKeeper with this GateKeeper name. (please refer
to -gkdis)
-gkdis
set auto discovery function on or off. If this function is enabled
and IP address of GateKeeper is set as 255.255.255.255,
LAN Phone will multicast to search a GateKeeper on network
with configured GateKeeper name (please refer to -gkid); if IP
address of GateKeeper is set, before LAN Phone register to
the assigned GateKeeper, it will send out GRQ(GateKeeper
Request) message with configured GateKeeper name to
GateKeeper first.
-ttl
to set timer for TTL(Time To Live). Gateway would send RRQ,
with keepAlive, to gatekeeper periodically according to TTL
timer.
-rtp
to allocate RTP port range—NOT RECOMMENDED. This
may be used when RTP port range conflicts with Firewall
policy. (each port of Gateway use 2 RTP ports)
-gkfind
gatekeeper finding port. Port number, which Gateway uses it
to discover a gatekeeper. Default value is 1718.
-gkras
to set default gatekeeper RAS port number. Default value,
