FXO H.323 Gateway User Manual
Document Ver.: 118a
Release Sep, 2004
35
3.7 System Configuration
Figure 3.9: System Configuration
Inter Digit Time – The call will be sent out if user didn’t enter the digits after
this timer.
Forward time – It supports the No Answer Forward function. If users
configure it for 10, the call will be forwarded when it rings about 10
seconds. From 5 to 65535.
Support the FXS type only
.
Keypad Type – User could define the keypad for the DTMF sending.
In-Band : The DTMF signal sending by RTP.
Out-Band : The DTMF signal sending not by RTP. Including the
H.245(Alpha), H.245(Signal), Q.931 and RFC 2833.
User Defined Prefix Switch – Select on/off for User defined local zone
prefix switch. If user enables prefix function, once user dials out, gateway
will automatically add prefix number before number user dialed.
User Defined prefix Disable – Disable the defined prefix after press the
selected digit (0,1~9, *).
User Define prefix – This will be added in the first digits of the numbers
that users had dialed. Can also define IP address here in P2P mode, once
user press “#”, Gateway will call out this IP address.
Codec Select Method – This could support that the codec will follow the
MSD (MasterSlaveDetermination) or the caller side.
