FUXTEC FX-AF1196, Manual

Page: 61 / 137

Original-Bedienungsanleitung FUXTEC FX-AF1196_de_en_fr_ita_rev02
61
8. Care and Cleaning
8.1 Storage
•
Protect the wheels and axles from rust:
–
Remove the locking pin and slide the wheel off the hub.
–
Lightly coat the axles with axle grease.
–
Slide the wheel back onto the hub and install the locking pin.
•
Drain the fuel system completely. Follow the engine manufacturer's
instructions for this. Add a fuel stabilizer to prevent the fuel from
becoming unusable during an extended storage period.
•
The engine must be warm while the oil is drained from the engine.
Refill with fresh oil of a recommended type.
•
Clean the exterior surfaces, engine, and fan.
•
Remove the spark plug, pour one ounce of SAE 30 oil into the spark
plug hole.
•
Plug the hole and slowly pull the starter cable to distribute the oil
evenly throughout the cylinder head area.
•
Reinstall the spark plug.
•
Move the device to a suitable storage location. If you choose to use a
fuel stabilizer and have not drained the fuel system, follow all safety
instructions and storage precautions in this manual. This will reduce
the fire risk due to the ignition of gasoline vapours. Remember that
gasoline vapours can travel to distant ignition sources and ignite,
causing explosions and fires.
•
If there is a possibility of unauthorized use or tampering, remove the
spark plug and store it safely before storing the petrol tiller. Be sure to
plug the spark plug hole to prevent foreign objects from entering.
8.2 Disposal
•
When the device needs to be replaced after prolonged use, do not
dispose of it in household waste. Dispose of it in an environmentally
friendly manner.
•
Please dispose of used engine oil in an environmentally friendly