Instructionmanual for LED-Frontlight »Silicone Easy«
Art. Nr.: 070-50216/070-50219
Instruction for frontlight charging
u
Charge the light fully before use or storing
for long period
u
Open the USB cover at the bottom of light.
Plug in Micro USB cable with connected
adaptor or computer, charging indicator
from Red (Charging) change to Green (full).
u
Charging time: 2,5 hours
u
Running time:
25 LUX = 2 hours running time
15 LUX = 2,5 hours running time
u
Plug off the USB cable and close the USB
cover.
ATTENTION:
u
Highly recommended to charge the battery
immediately when the low battery indicator
light turns red.
u
DO NOT use this product while recharging.
u
DO NOT charge the battery for more than
15 hours consecutively.
GB
Technical Details and references
u
With one high-efficiency LED
u
Two Light performances adjustable: 25/15 LUX
u
Vehicular optical test requirement, German
standard
u
With rechargeable Li-Polymer-Akku (550mAh)
u
With one pc recharger, Reloading time:
about 2,5 hours
u
With ON/LOW/HIGH/OFF-button
u
With low battery indicator function. This
rechargeable battery frontlight is approved
according to StVZO and meets the required light
values unless the low battery indicator shows
red light
Safety Precautions:
u
Do not look at illuminated
LED’s directly
u
Keep this product away from
heat and moisture
Montage:
u
Install the bracket on handle bar properly by tighten the strap.
u
Aaccording to StVZO §67 the lighting equipment must be fit-
ted correctly and firmly and constantly be ready for operation.
Lighting equipment must not be covered.
u
Remove light by open the strap if need recharge.
u
Adjust the bicycle lamp so that
the center of the beam at a
distance of 5 m only half as
high as the upper edge of the
headlight.
u
When low battery indicator turn ON, the batteries must be
recharge as soon as possible.
Batteries do not belong
to the domestic waste.
As a consumer you
have theobligation
to bring theempty
batteries back.
Low battery indicator
Switch
070-50216_Silicone_easy_SFL-551.indd 2
11.12.17 11:27