00107960, Version 1.0
40/64
INSTALLTION
Inserting/Exchanging gobos
DANGER!
Install the gobos with the device switched off only.
Unplug from mains before!
If you wish to use other forms and patterns as the standard-gobos, or if gobos are to be exchanged, please
follow the instructions below:
CAUTION!
Never unscrew the screws of the rotating gobo
as the ball bearing will otherwise be opened!
Remove the fixation-ring with an appropriate tool. Remove the gobo and insert the new gobo. Press the
fixation-ring together and insert it in front of the gobo.
Notes!
Slot-in gobo-system for exchanging gobos without tools!
Inserting/Exchanging gobos as described above.
Transport securing
The DMH-200 comes with locked transport securings in order to avoid damages.
Please note:
All transport securing must be unlocked before operating the device!
TILT-securing:
Slide the stop lever at the side of the projector arm from Lock to Unlock. Now, the
projector head can be freely moved in the Y-direction.
PAN-securing:
Slide the stop lever at the bottom of the projector
arm from Lock to Unlock. Now, the projector head
can be freely moved in the X-direction.
Before transporting the device, please slide all stop levers from Unlock to Lock.
