00029992.DOC, Version 1.3
48/90
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1:
Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2:
Remove the old fuse from the fuseholder.
Step 3:
Install the new fuse in the fuseholder.
Step 4:
Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
230 V AC, 50 Hz ~
Power consumption:
2400 W
Max. power output (safety power outlet):
2300 W
Max. total current (safety power outlet):
10 A
DMX-control-channels:
4
DMX-512-connection:
5-pin and 3-pin XLR
Connections (signals are transmitted within the device):
Audio:
Audio HDMI/DVI, RCA l/r
Video:
Video HDMI/DVI, YPbPr RCA,
s-video RCA, VGA 15 pins
Aerial:
coaxial
Rotation-speed: approx.
4 RPM
Dimensions (LxWxH):
540 x 500 x 285 mm
Max. tearing load:
80 kg
Max. pressing load:
80 kg
Max. dimensions of mountable objects (LxWxH):
860 x 640 x 150 mm
Weight (net):
35 kg
Fuse:
T 1 A, 250 V
Fuse (safety power outlet):
T 10 A, 250 V
Accessory:
FUTURELIGHT CP-240 controller
No. 51834265
Wizard-512 USB DMX-So Interface
No. 51860102
Wizard-1024 USB DMX-So Interface
No. 51860110
Please note: Every information is subject to change without prior notice. 28.07.2009 ©
