00029992.DOC, Version 1.3
43/90
Clear total time
With this function you can clear the running time of the device
• Select
“Clear total time”
by pressing Up or Down.
• Press the Enter-button to confirm.
• Press Up or Down, the display shows
“ON”
or
“OFF”
.
• Press the Enter-button to confirm.
• Press the Mode/Esc-button in order to return to the main menu.
Software version
With this function you can display the software version of the device.
• Select
“Software version”
by pressing Up or Down.
• Press the Enter-button, the display shows
“V-X.X”
, “X.X“ stands for the version number, e.g. “V-1.0”, “V-
2.6”.
• Press the Mode/Esc-button in order to return to the main menu.
Switch Control
Power outlet on or off
With this function you can switch the safety power outlet on or off via the Control Board.
• Select
"Switch on or off"
by pressing Up or Down.
• Press the Enter-button, the display shows
“ON”
or
“OFF”
.
• Press Up or Down to select
“ON”
if you wish to strike the safety power outlet or
“OFF”
in order to switch it
off.
• Press the Enter-button to confirm.
• Press the Mode/Esc-button in order to return to the main menu.
Power outlet on or off by power on
With this function you can select if the safety power outlet will be switched on when switching the power on.
Select
“ON”
by pressing Up or Down if you wish to enable this function or
“OFF”
if you don’t.
Power outlet on via external controller
With this function you can select if you can switch the safety power outlet on via an external controller. Select
“ON”
by pressing Up or Down if you wish to enable this function or
“OFF”
if you don’t.
Power outlet off via external controller
With this function you can select if you can switch the safety power outlet off via an external controller. Select
“ON”
by pressing Up or Down if you wish to enable this function or
“OFF”
if you don’t.
Personality
Status settings
Address via DMX
With this function, you can adjust the desired DMX-address via an external controller.
• Select
“Address via DMX“
by pressing Up or Down.
• Press the Enter-button, the display shows “ON” or “OFF”.
• Press Up or Down to select “ON” if you wish to enable this function or “OFF” if you don’t.
• Press the Enter-button to confirm.
• Press the Mode/Esc-button in order to return to the main menu.
• On the controller, set the DMX-value of channel 1 to "7".
• Set the DMX-value of channel 2 to "7"or "8". When set to "7" you can adjust the starting address between 1
and 255. When set to "8" you can adjust the starting address between 256 and 511.
• Set the DMX-value of channel 3 to the desired starting address. If you want to set the starting address to
57, set channel 1 to "7", channel 2 to "7" and channel 3 to "57". If you want to set the starting address to 420,
set channel 1 to "7", channel 2 to "8" and channel 3 to "164" (256+164=420).
• Wait for approx. 20 seconds and the unit will carry out a reset. After that, the new starting address is set.
