21
DISPLAY
FITTING
The mechanism should be fully extended
before the screen can be fitted.
1
Press the ‘OUT’ button on the remote
and wait for the SPS to fully extend.
2
Press ‘B’ on the IR remote repeatedly
to pulse the mechanism fully out into
its service mode.
3
Manually pull the mechanism out further
so that the screen uprights can be bolted
onto the frame.
4
Attach the screen uprights to the
display and offer it to the mechanism.
5
Make final adjustments to the display
by altering the height that the display
is fixed to the upright slots, or
adjusting the SA/SAH top bolt heads
on the screen mount plate..
6
Return the mechanism from
service mode by pressing ‘A’
repeatedly on the IR remote.
Once the mechanism cannot
pulse any further, wait 2
seconds and the mechanism
will return to user mode.
If further adjustments need to be
made. Remove and reposition the
display on the mounting uprights.
7
Summary of Contents for SPS & SA
Page 2: ......
Page 29: ...NOTES...
