24
RADIO FREQUENCY
(RF)
If purchased with the Radio Frequency (RF) control option, this mechanism can be controlled via the supplied 4
button Radio Frequency (RF) Remote Control, paired with the in-built Radio Frequency (RF) sensor.
Confirmation of
Radio Frequency (RF)
input will be shown by a single flash of the large green LED located on the
end of the control box.
Radio Frequency (RF)
control does not require line of site, but signal can affected cabinet thickness, cabinet
material or other electronic signals (i.e. strong WIFI signals).
Radio Frequency (RF) Remote Control Button Layout
IMPORTANT
Pressing any button while the mechanism is moving will STOP the mechanism.
IN -
Brings the mechanism into
the cabinet.
OUT -
Brings the mechanism out
of the cabinet.
STOP -
Will stop the operation of
the mechanism at ANY position.
STOP -
Will stop the operation of
the mechanism at ANY position.
The Radio Frequency (RF) Remote Control can only be used to recall the above functions.
The mechanism limits and preset positions must be programmed using the supplied Infrared (IR) Remote
Control.
Summary of Contents for SPS & SA
Page 2: ......
Page 29: ...NOTES...
