MULTISCAN
7
MANUAL
Guidance for operation mode
Measuring values can be impaired through certain ambient conditions. These in-
cludes:
∙ the proximity of other equipment that produce strong (electro-)magnetic fields
∙ moisture
∙ metallic building materials
∙ foil-laminated insulation materials
∙ conductive wallpapers.
Therefor, please also observe other invormation sources (e.g. construction plans) be-
fore drilling, sawing or routing into walls, ceilings or floors.
“Autocal” Calibration Indicator
When the checkmark behind “Autocal” flashes over a longer period or if it is not dis-
played anymore, reliabe scanning is no longer possible. In this case, send the meas-
uring tool to repair.
Maintenance / Service / Cleaning
∙ Wipe away debris or contamination with a dry, soft cloth. Do not use cleaning agents
or solvents.
∙ In order not to affect the measuring function, decals/stickers or name plates, espe-
cially metal ones, may not be attached in the sensor area, on the front or backside
of the measuring tool
∙ Store and transport the measuring tool only in the supplied protective case.
