DISTY40 / DISTY80
5
MANUAL
Measuring with tripod
The reference must be appropriately adjusted in order to be able to take correct
measurements with a tripod. You can switch the reference by
-button. The setting
can be shown on the display.
Operation
Switching on and off
Switches on the instrument and laser by using the
-button. Pressing the
-button
for longer switches the instrument off. The laser will be deactivated after 30 seconds
of inactivity, the device after 3 minutes.
Clear button
Pressing the
-button, the last action is cancelled. While making area of volume
measurements, each single measurements can be deleted and remeasured in series.
Reference
The default reference setting is from the rear of the instument. The display will show
you .
Press the
-button to change the reference point to the forefront. The display will
show you .
Press the
-button again to change the reference point again to the rear. The dis-
play will show you .
The referece point can alse bo moved to the point of the positioning bracket when it
is unfolded 180°. This can be done with the
-button, but only when it is unfolded.
The display shows .
Tilt-function
Fot some measuring functions the inclination of the device can be used to calculate
the result. Use the -button to activate this function.
(Available for single pythagoras, double pythagoras, double pythagoras with partial
height).
