DISTY40 / DISTY80
15
MANUAL
TECHNICAL SPECIFICATIONS
DISTY40
DISTY80
measuring range
0,05 to 40m
0,05 to 80m
measuring accuracy
± 2mm
measuring units
m / inch / ft
laser classification
class ii
laser type
635nm, <1 mw
distance measurement with tilt sensor
P
horizontal measurement range
±90°
horizontal measurement accuracy
±0,5°
area, volume measurement
P
indirect measurement
P
pythagoras proposition
P
plus-munus method
P
continuous measurement
P
minimum/maximum measurement
P
display illumination
P
show beep
P
multifunctional end piece
P
protection against splashes and dust
ip54
historical storage
99
temperature range of operation
-10°c to 50°c
temperature range of storage
-20°c to 60°c
battery life
up to 4000 measurements
batterie selection
tyoe aaa - 2x 1,5v
laser switch-off automatically
after 30 seconds
instrument switch-off automatically
after 3 minutes
dimensions
115 x 48 x 29mm
weight
0,11kg (without battery)
FUTECH instruments are made with carefully select-
ed components and crafted with the utmost care.
By that, we can offer you an optimal quality. If your
device should however be defective due to faulty
materials or a production error, you can benefit from
a 2 years manufacturer’s warranty.
During this period, your instrument will be repaired
or replaced for free if following conditions are met:
1.
Your device has been purchased less than two
years ago from an authorized FUTECH distrib-
utor. Please provide a copy of the invoice that
indicates the type and the serial number of
your faulty device.
2.
You deliver the faulty device to an authorized
FUTECH distributor in its original protective
packaging (pouch in fabric, plastic suitcase ...).
3.
The device shows no damage caused by in-
correct usage (eg. Crack(s) from a fall, inter-
nal water damage, fuses melted by the use of
an inappropriate charger or adapter, battery
leakage, device opened by a non-authorised
technician, ...)
The manufacturer’s warranty does not include peri-
odic maintenance works (eg. Annual adjustments)
nor the included batteries.
FUTECH is a registered trademark of LASETO N.V.
in Belgium (BE 0808 043 652) available at iwww.
futech-tools.com.
