17
16
5 -
Initial speed (
green
+
blue
blinking twice)
TUNING THE DRIVING EXPERIENCE
In the select mode (the
green
+
blue
LEDs blinking
twice), press the SET button for 2 seconds or more to
enter the setting mode. Each time the SET button is
pressed once, the LED pattern changes and the initial
speed value changes as shown on the right. Align the
LED with your favorite setting, and press the SET button
for 2 seconds or more. The set value is validated and it
returns to select mode. The changed value will be reset
if the power is turned off without saving. Please save
your settings before turning your unit off (Page 22).
In the select mode (the
green
+
red
LEDs blinking twice),
press the SET button for 2 seconds or more to enter
the setting mode. Each time the SET button is pressed
once, the LED pattern changes and the neutral brake
power value changes as shown on the right. Align the
LED with your favorite setting, and press the SET button
for 2 seconds or more. The set value is validated and it
returns to select mode. The changed value will be reset
if the power is turned off without saving. Please save
your settings before turning your unit off (Page 22).
In the select mode (the
green
+
orange
LEDs blinking twice), press the SET
button for 2 seconds or more to enter the setting mode. Each time the SET
button is pressed once, the LED pattern changes and the initial brake power
value changes as shown on the right. Align the LED with your favorite setting,
In the select mode (the
blue
+
red
LEDs blinking twice),
press the SET button for 2 seconds or more to enter
the setting mode. Each time the SET button is pressed
once, the LED pattern changes and the full brake power
value changes as shown on the right. Align the LED
with your favorite setting, and press the SET button for
2 seconds or more. The set value is validated and it
returns to select mode. The changed value will be reset
if the power is turned off without saving. Please save
your settings before turning your unit off (Page 22).
and press the SET button for 2 seconds or more. The
set value is validated and it returns to select mode. The
changed value will be reset if the power is turned off
without saving. Please save your settings before turning
your unit off (Page 22).
It is the amount of speed as soon as you begin to pull your throttle lever. The
higher the value = higher speed at the beginning of your throttle. Excessive
initial speed can cause tire spin or chip gears. Choose your setting carefully.
It is the brake power that is applied when the throttle is in fully braked position.
The higher the value = stronger braking force at full braking
It is the amount of braking force applied when the
throttle is returned to neutral.
The higher the value = increased braking force
Commentary
Commentary
Commentary
It is the brake power that is applied once the
throttle is placed in the brake position. The higher
the value = stronger initial braking force
Commentary
The braking force of the brake
w h e n t h e t h r o t t l e i s i n t h e
middle range is linked with the
initial brake power (item 7) and
the full brake power (item 8) as
shown on the right.
A d v i c e
6 -
Neutral brake power (
green
+
red
blinking twice)
7 -
Initial brake power (
green
+
orange
blinking twice)
0%
14%
8%
8 -
Full brake power (
blue
+
red
blinking twice)
6%
16%
12%
26%
70%
90%
80%
100%
0%
8%
4%
10%
12%
14%
16%
32%
Brake high point
Braking force
MAX
0
Throttle
position
Full brake power
Initial brake power
(The instant that the throttle lever is placed in the
brake position)
