Sailplane Section
BRAKE FLAP MIXING (BKF)—5-S
This function is used to define the following
types of brake flap mixing:
Brake flap ->
>
elevator mixing
Brake flap -> aileron mixing
Brake flap ->speed flaps mixing
These
mixing functions are useful for com-
pensating for flap actuation trim changes, increas-
ing the lift capability of the wing, making tighter
turns, and increasing maneuverability. The mixing
neutral position can be offset from the brake flaps
neutral position.
Activation of Brake Flap Mixing
In the Condition Menu, press the BKF key to get the
BRAKE FLAP menu, as shown below.
Mixing Function
Selection
Brake flap -> Elevator
Offset setting
Return To Condition
Menu
Brake flap -> Aileron
Brake flap -> Speed
Flaps
Offset Point Set Key
Offsetting the Mixing Neutral Location
Press the R key. Then set the brake control to the
desired offset position and press the SET F key.
Mixing Selection
Brake Flap -> Elevator Mixing may be set up by
pressing the A
key. For a description of the setting
method, see page 133 following.
Brake Flap -> Aileron Mixing: use the B key to call
the setting screen. For a description of the setting
method, see page 134.
Brake Flap -> Speed Flaps Mixing: call the setting
screen by pressing the C key. A description of the setting
method may be found on page 135.
Sailplane Section, Page 132
Summary of Contents for 9ZAP - PART2
Page 78: ...Printed in Japan 990606...
