Sailplane Section
Delay Rate Setting
Press the C key and enter the rate with the numeric
keys F to M . The delay may vary from 0 to 100% (the
initial value is 0%). A 100% delay takes about five seconds
to move full travel.
Entering the Preset Position
Press the D key and set the rate with the numeric
keys E to M . The setting range may vary from —100 to
+100% and the initial value is 0%. Press the number you
want. Caution: use small numbers as elevator trim changes
are very effective!
ON/OFF Switch Setting
An ON/OFF switch is not defined initially. To define
one. display the switch setting screen by pressing the
SWT P key. Use the keys to choose the switch and ON
direction you want. For a description of the switch
setting method, see page 37.
Mixing Rate Trim Volume Selection and Operating
Direction
A mixing rate volume control is not defined initially.
To define one, display the volume setting screen by
pressing the VOL
O
key. For a description of the
volume setting method, see page 37. The volume control
adjusts ± 25% of the set mixing rate.
Sailplane Section, Page 144
Summary of Contents for 9ZAP - PART2
Page 78: ...Printed in Japan 990606...
