Receiver
R334SBS
Link failed
Link established
T-FHSS
T-FHSS SR
The link is completed.
Repeat the linking operation
39
In
it
ia
l S
e
t-
Up
After setting up this far is complete, when using a FASST system (R614FS/FF/FF-E) or S-
FHSS system (R2104GF, R204GF-E, etc.) receiver, go to "S-FHSS/FASST Receiver Link"
on page 40. When using a T-FHSS SR receiver (R334SBS) and T-FHSS receiver (R304SB,
etc.), go to the next step 3.
3
Bring the transmitter and receiver within 50cm of each other (antennas do not touch) and
turn on the receiver power.
4
Tap [Link] on the transmitter T7PXR screen, you will hear a chime sound, and T7PXR will
enter the link mode for 20-seconds. During the 20-second link mode, push the receiver side
push switch for about 2-seconds or more
5
During the 20-seconds link mode, press the receiver for at least 2-seconds. The LED blinks
red and then changes to a greenish-red to steady green light. When the T7PXR makes a
beeping sound and the message "Link with receiver" appears on the screen, release the
receiver push switch. The ends reading of mutual ID and display the memorized receiver
ID number on the T7PXR screen. Power cycle the receiver. If the "Not found receiver" error
screen is displayed, linking failed. Check the set contents and repeat the linking operation.
Summary of Contents for 7PXR
Page 1: ...1 I INSTRUCTION NSTRUCTION M MANUAL ANUAL ...
Page 204: ...204 ...
