FUTABA 4PL-2.4G Instruction Manual Download Page 96

Page: 96 / 105

The power off forgotten alarm

(OPE-TM)

10m, OFF

(ENG )

(

)

Menu charactre (MENU)

ENG,

Fu
n

tio

System Functions "SYSTEM"

(Changing the power off forgotten alarm setting)

Select the setting item "OPE-TM" by (UP) or

(DN) button, and use the (+) and (-) buttons to

select the power off forgotten alarm mode.

"10m" :If an operation is not performed within 10 minutes

while the power is on, an audible alarm sounds.

"OFF" :Power off forgotten alarm setting OFF

When ending, return to the menu screen by

pressing the (CT) button.

(Changing the basic menu character display)

Select the setting item "MENU" by (UP) or (DN)

button, and set the basic menu character dis-

play with the (+) or (-) button.

"ENG" : Basic menu displayed in Alphabetic character.
"

" : Basic menu displayed in katakana character.

When ending, return to the menu screen by pressing the

(CT) button.

- Refer to the next page for a description of the adjuster

(ADJUSTER).

Summary of Contents for 4PL-2.4G










































































































Search results

Summary of Contents for 4PL-2.4G

Reviews:

Brands by name

Popular brands

FUTABA 4PL-2.4G, Instruction Manual

Search results

Summary of Contents for 4PL-2.4G

Reviews:

Brands by name

Popular brands