DN
UP
Move the cursor to
*STEERING by (UP)
or (DN) button and
press the (CT) button.
Move the cursor to
*THROTTLE by (UP)
or (DN) button and
press the (CT) button.
Channel menu screens
(STEERING 1 menu screen)
(THROTTLE 1 menu screen)
(CH3/CH4 menu screen)
59
Fu
n
c
tio
n
Displaying other functions of each channel menu
Displaying other functions of each channel menu
(All channel)
In addition to the steering, throttle, CH3/4 REV, EPA, SUBTR, EXP, ACC, SPEED,
F/S and other settings displayed before this page, TRIMD/R, ATL, and CH3/4 POSI
can be checked and adjusted on each channel menu screen.
When the TRIM D/R, ATL, and CH3/4 POSI functions are not assigned to trim/
dial, they can be set on this screen.
When the functions displayed on this screen are assigned to trim/dial by function
select dial function (P60), they are linked with that dial.
When CH3 or CH4 is set to SW by function select switch function (P62), they are
linked to switch operation. Therefore be careful because when CH3/4 are adjusted
on this screen, unintended operation may be performed when the switch was oper-
ated.
1
(Function selection)
On each channel menu screen select D/R, ATL, POSI or
other setting item by (UP) or (DN) button.
2
(Position setting/rate adjustment)
Adjust the position or rate with the (+) or (-) button.
3
When ending adjustment, return to the menu screen by
pressing the (CT) button.
Rate/position adjustment on channel menu screen
Adjust button
- Adjust with the (+) and (-) but-
tons.
- Return to the initial value "100"
by pressing the (+) and (-) but-
tons simultaneously for about 1
second.
Channel 3 position (POSI)
Channel 4 position (POSI)
0~100%
Initial value: 0
D/R rate (D/R)
0~100%
Initial value: 100
Brake amount (ATL)
0~100%
Initial value: 100%
