Changing wheel position and modifying for left-hand use
23
B
e
for
e
Using
Changing the wheel position
The wheel position can be offset by using the
accessory APA wheel position offset adapter.
(See page 24 for the modification method.)
Angle can be adjusted
4HEANGLECANBElNELYADJUSTEDBYADJUSTINGTHESTEERINGWHEELUNITINSTALLATION3EE
THEMODIlCATIONMETHODONTHENEXTPAGEFORTHEADJUSTMENTDETAILS
The operating angle of the wheel can be adjusted.
The operating angle of the wheel can be changed from 34 deg to 32 deg by installing
THE DEG WHEEL ADJUSTER 3EE 2EMOVING THE STEERING WHEEL UNIT BELOW FOR THE RE
-
placement procedure.
)F YOU INSTALL THE DEG WHEEL ADAPTER BE SURE TO ADJUST THE SCALE OF THE STEERING
CHANNELACCORDINGLYBYUSINGTHE!DJUSTER&UNCTION
(p.116).
Modifying for left-hand use
The wheel section left and right installa-
tion direction can be reversed.
(See page 26 for the modification method.)
Removing the steering wheel unit
s /BTAIN A MM HEX WRENCH AND PHILIPS
screwdriver.
1
Hold the wheel and remove the
screw.
Steering wheel mounting screw
Unit mounting screws
2
Pull off the wheel and wheel
adapter.
Since the wheel adapter is 34 deg
as standard, install the 32 deg
wheel adapter at final installation.
3
Remove the 3 steering wheel unit
mounting screws.
Wheel
Wheel adapter
