7.
D
D
E
E
F
F
Unscrew cover plates
D
from the front of
the machine, rotate through 180°, screw
on the opposite side.
8. Unscrew door lock
E
, push down slight-
ly and remove from the front of the ma-
chine.
9. Press snap-in button
F
in and down,
press cover down slightly and remove
from front of the machine.
10. Change door lock
E
over to the opposite
side, screw down the door interlock.
11. On the other side, insert cover
F
and al-
low snap-in button to lock into place.
12. Insert loading door and hinges into re-
cesses on the front of the machine and
screw down.
Note regarding contact protection:
The
machine is only secure for operations again
once all plastic parts have been inserted.
Special accessories
•
stack kit
Available from your Service Force Centre
or your specialist dealer
These intermediate installation kits can be
used to arrange the dryer and an washing
machine (60 cm wide, front loaded) as a
space-saving washer/dryer stack. The
washing machine is at the bottom and the
dryer is at the top.
Read carefully the instructions supplied
with the kit.
•
drain kit
Available from your Service Force Centre
or your specialist dealer
Installation kit for direct draining of con-
densate into a basin, siphon, gully, etc.
The condensate tank then no longer has
to be drained, it must however remain in
its intended position in the machine.
Read carefully the instructions supplied
with the kit.
•
pedestal with the drawer
Available from your Service Force Centre
or your specialist dealer
To situate the dryer in optimal high and
have some additional space to store (e.g.
laundry).
Read carefully the instructions supplied
with the kit.
Service
In the event of technical faults, please first
check whether you can remedy the problem
yourself with the help of the operating in-
structions - see chapter
What to do if….
If you were not able to remedy the problem
yourself, please contact the Customer Care
Department or one of our service partners.
In order to be able to assist you quickly, we
require the following information:
– Model description
– Product number (PNC)
– Serial number (S No. is on rating plate stuck
to the product - to find it see chapter
Product
description
))
– Type of fault
– Any error messages displayed by the ap-
pliance
So that you have the necessary reference
numbers from your appliance at hand, we
recommend that you write them in here:
20
Summary of Contents for Novamatic TW 7757
