48
Figure 49: Remove the small box
There is a spare print bed plate taped to the print bed with blue tape. Remove the tape and remove the spare
plate.
Remove the zip ties that hold the X axis and print head in place. They are marked with blue tape. There are two
on the left Y carriage and two on the X carriage.
Figure 50: Cut the zip ties flagged with blue tape (qty 4)
Open the small box and check the contents against the enclosed packing list.
Summary of Contents for F306 Generation I
