43
To enter the name for the selected Zone:
a
. Select the Name menu item. The current Zone name is displayed with
the fi rst character highlighted.
b.
If required, press the Forward (or Backward) key to highlight the
character you wish to change.
c.
Turn the Encoder to display the required value for the highlighted
character.
d.
Press the Encoder to accept the displayed value and move to the next
character.
e.
Repeat Steps b–d until you have worked through all the characters you
wish to change.
f.
Press and hold down the Encoder to save the changes and exit.
PREPARING FOR iPod OR USB INPUT
This section describes how to prepare for iPod and USB input for the
MS-IP700 and MS-AV700 models.
When using your iPod with either model:
•
Always disconnect your iPod from the unit when not in use and do not
leave in your vessel. This helps reduce risk of theft or damage as vessel
cabins can reach extreme temperatures.
• Do not remove iPod or use stereo in a distracting manner while operating
the vessel. Check and obey all marine laws in association with use.
28
LISTENING TO AUXILIARY INPUT
The 700 Series can accept audio input from a TV, games console, portable
player, computer, DVD player or any compatible device.
To listen to input from an alternate auxiliary device:
AUXILIARY SOURCE SCREEN
The input source screen displayed when you select alternate auxiliary input
will depend on how the unit has been set up. The screen to display can be
selected from one of the screens shown in Figure 6, below.
Input level for the selected device can be adjusted if required. For further
details, see “Preparing for Auxiliary Input” on page 47.
AUXILIARY INPUT
Auxiliary
•
Press the Auxiliary key:
•
On the fi rst press:
MS-IP700:
the USB input source Storage screen is
displayed.
MS-AV700:
the iPod input source screen is displayed.
•
On the second press:
MS-AV700:
the input source screen for an alternate
auxiliary input device is displayed (see below).
Figure 6 – Examples of auxiliary input source screens
