15
Input Source name
Signal strength
Tuning mode
Figure 2 – Example AM band input source screen
Selected
frequency (or
channel for VHF)
Current time
TUNER
LISTENING TO THE TUNER
To select one of the available tuner bands:
TUNER SOURCE SCREENS
AM/FM/VHF
An example of a typical tuner input source screen is shown in Figure 2 below.
Tuner
• Press the Tuner key to select input from each of the follow-
ing in turn: AM, FM, VHF or SiriusXM (requires optional Sirius
tuner module SVX-100, USA only). The applicable input source
screen is displayed for each band.
56
Tel mute
Use this option to control which action is taken when the 700 Series is
connected to a cellphone hands-free kit.
To change the Tel mute setting:
1.
Press the Menu key.
2.
Turn and then press the Encoder to select
Settings > Tel mute.
3.
Turn the Encoder to select the required option:
•
Mute.
Mutes the audio output from the 700 Series when a call is
received on your cellphone.
•
Aux.
Allows the received call to be broadcast through the Auxilary input
on the 700 Series.
Note: This feature may not operate all available hands-free kits.
Hands free kit must be connected to the TELMUTE input and
AUX input.
4.
Press the Rotary Encoder to save the setting and exit.
5.
Press any key to exit
Tuner region
Use this option to select the correct region .
To change the tuner region setting:
1.
Press the Menu key.
2.
Turn and then press the Rotary Encoder to select
Settings > Tuner region.
3.
Turn the Rotary Encoder to select the required region.
4.
Press the Rotary Encoder to save the setting and exit.
5.
Press any key to exit
VHF region
Use this option to select the correct VHF tuning region.
To change the VHF region setting:
1.
Press the Menu key.
2.
Turn and then press the Rotary Encoder to select the
Settings > VHF region.
3.
Turn the Rotary Encoder to select the required region.
4.
Press the Rotary Encoder to save the setting and exit.
5.
Press any key to exit
