Gator Automatic Butt Fusion Range
Operating Manual
EDOI6922
Page 17 of 44
Issue 02
9.0 Machine operation
9.1 Power-up sequence
Once the equipment is connected as described in Section 6.3, connect the
machine to a suitable power supply and switch on.
When the system is switched on, the LCD (Liquid Crystal Display) indicates the
following message for approximately 4 seconds and a short audible tone will
sound.
This display indicates the current time, date and if configured, the owner details.
If ISO12176-3 login method have been enabled the unit will be inoperable until a
valid operator barcode is scanned. The screen will either prompt for a valid
operator barcode, when a valid operator barcode is scanned to the unit before the
information entry screen will be displayed. If the red button is pressed the user
menu will be displayed see section 13 user menu.
9.2 BlueBox
If BlueBox has been enabled then a mobile device must be connected to the unit
via Bluetooth with the BlueBox application open, before the information entry
screen is displayed. Refer to mobile device operating instruction for connecting
via Bluetooth. For further details contact Control Point on +44 (0)1246 262422 or
email [email protected].
9.3 Service alarm
This indicates that either, the number of joints made or the number of days since
the last service has been exceeded. The unit is in need of a service and contact
should be made with nearest service centre.
If Service Lockout has been disabled - press the green button to carry on using
the box. Service required will be recorded on the joint data until the unit is
serviced and the service period been reset.
! Service Required!
Contact
Fusion Group
+44 (0)1246 268666
+44 (0)1246 268052
Press ● to continue
If Service Lockout has been enabled - the unit is inoperable until it has been
serviced and the service period has been reset.
03/09/14
12:35:10
Fusion Group
