SMARTSPEED and SMARTSPEED LITE Advanced Protocol Guide
© 2010 Fusion Sport International
12
USER OPTIONS
There are a wide range of options available for cutting drills –
1.
Traffic Light Start Control (0-1-3, 0-1-2-1 and 0-1-2-3 drills only)
–
a.
Traffic Light Start Type - set the type of start signal to be a green light (“Light”), sound (“Buzzer”), or
both (“Light/Buzzer)
b.
Random Start Period - set the delay between “ready” and “go” signal to be either a fixed value, or
random value within a range
2.
Reactive Trigger Mode
- control the type of reactive signal made to the athlete as they break the trigger gate
(Light, Buzzer or Both)
3.
Enable 1
st
Level Delay
– set a delay between breaking the trigger gate, and the reactive signal appearing. Can
be either a fixed value or random within a range
4.
Enable 1
st
Level Manual Trigger
– set the direction (option) for the reactive signal. The default is random (R).
Users can choose 0, 1, 2 which will select the respective gate in order that the user walked through the test
track (i.e. 0 = left, 1 = middle, 2 = right on a 0-1-3 drill)
5.
Additional options on 6 gate cut
– enable 2
nd
level delay and manual trigger direction is also available for the
6 gate protocol as there are two levels of reaction.
Traffic Light Start
Control
Select different start
type (Light/Buzzer)
and the random start
delay period (0-1-3
and 0-1-2-1 only)
Reactive trigger
response
Control the reactive
trigger type
(Light/Buzzer or
both)
Reactive trigger delay
Control the reactive
trigger delay period
(Fix/Random)
Trigger direction
Set trigger directions
(Fix/Random)
