1. MOUNTING
1-3
6. Attach the flush mount fixture to the TZT19F with hex bolts.
7. Fasten each wing bolt so that the protector for screw touches the mounting panel.
8. Fasten the wing nuts tightly.
Note:
Use of excessive torque when fastening the wing bolts can cause the flush
mount fixture to tilt or warp. Check that the flush mount fixtures and wing bolts are
not tilted or warped, referring to the following examples.
Set the TZT19F to the cutout.
Attach the flush mounting
plate to the TZT19F.
Attach the flush mounting
plate to the TZT19F.
①
①
②
②
Wing bolt
Wing nut
Flush mounting fixture
Protector for screw
Mounting panel
TZT unit
TZT unit
Flush mount fixture is fixed at right angle.
Flush mount fixture is warped, wing bolts are tilted.
Summary of Contents for TZT19F
Page 55: ...18 Dec 2019 H MAKI D 1...
Page 56: ...11 Nov 2019 H MAKI D 2...
