![background image](http://html1.mh-extra.com/html/furuno/gp-1871f/gp-1871f_installation-manual_2350231024.webp)
APPENDIX 1 MENU TREE
AP-6
1
Files
Screenshots
User Data
Units
Units
Fuel
Formats and
References
Screenshots (shows number of screenshots saved to internal memory)
Export File Format (C-MAP, GPX,
CSV
)
Routes/Points (Shows number of routes/points
saved to internal memory)
Routes and
Points
Export to SD
Tracks
Settings
Backup
Notifications
Log
Export to SD
Import from SD (select file to import)
Tracks/Track Points (Shows number of routes and
points saved to internal memory)
Export to SD
Export to SD
Export to SD (CSV)
Distance (
NM
, SM, km, NM+ft, NM+m, SM+ft)
Rate (l/h,
US gal/h
, UK gal/h)
Bearing Display (M,
T
)
Magnetic Variation (
Internal
, External)
True Wind Calculation Reference (Ground,
Surface
)
Position Format (
DD°MM.MMMM’
, DD°MM.MMM’, DD°MM.MM’,
DD°MM’SS.ss”, DD.DDDDDD)
Speed (
kn
, km/h, m/s, mph)
Wind Speed (
kn
, km/h, m/s, mph, Bft)
Depth (m,
ft
, fm, pb, HR)
Fish Size (cm,
inch
)
Air Pressure (
hPa
, mBar, mmHg, inchHg)
Oil/Boost Pressure (Bar, PSI,
kPa
)
Volume (l,
US gal
, UK gal)
Height/Length (m,
ft
)
Temperature (°C,
°F
)
Restore from SD (select file to import)
Import from SD (select file to import)
Initial
Setup
Vessel Type (Power Displacement,
Power Planing
, Sail Boat)
NAVpilot Control (ON,
OFF
)
GP330B SBAS Mode (ON,
OFF
)
WB200 SBAS Mode (ON,
OFF
)
SBAS Mode (ON,
OFF
)
Heading Offset (-180.0° to +180.0°,
0°
)
Pitch Offset (-90.0° to +90.0°,
0°
)
Roll Offset (-90.0° to +90.0°,
0°
)
Max RPM (4000,
8000
, 12000, 16000, 20000)
Max Oil Pressure (600 kPa,
800 kPa
, 1000 kPa)
Max Engine Boost Pressure (160 kPa,
200 kPa
, 320 kPa)
Max Engine Coolant Pressure (320 kPa,
520 kPa
, 600 kPa)
Max Fuel Pressure (320 kPa,
520 kPa
, 600 kPa)
Engine Temperature (
86 to 302°F
, 122 to 410°F)
Engine Oil Temperature (
86 to 302°F
, 122 to 410°F)
Transmission Temperature (
86 to 302°F
, 122 to 410°F)
Language (
English US
, English UK, others)
Vessel
Autopilot
Data
Acquisition
SC-30 Setup
Instruments
Range
Setup
SBAS Mode (
ON
, OFF)
Restart GPS
Dynamic Model (
At Sea
, Automotive)
Navigation Speed (
Low
, High)
Internal
GPS Setup
Position Filter (
Off
, Low, Medium, High)
Speed Filter (
Off
, Low, Medium, High)
Map Datum (
WGS 1984
, others)
Perspective Angle (5° to 60°,
30°
)
Navigation
Setup
2
Restore
Defaults
Restore Default Settings (Select Yes/No from pop up window)
APPENDIX 1 MENU TREE
AP-7
Engines (
1
, 2, 3, 4)
Manual Management (
ON
, OFF)
Total Fuel Capacity (
0
to 9999 US gal)
NMEA Output Instance (0, 1, 2,
3
, 4, 5)
Select IF (Select [IF-NMEAFI] to set the analog data that is input
from the IF-NMEAFI.)
Category (Wind,ST800/ST850, Fuel, Fresh Water, Waste
Water, Live Weel, Oil, Black Water)
Resistance Full (0 ohm to 300 ohm; default:
33.50 ohm
)
Resistance Mid (0 ohm to 300 ohm; default:
310.00 ohm
)
Resistance Empty (0 ohm to 300 ohm; default:
240.00 ohm
)
Capacity (
0
to 2650 US gal)
Self Test (Starts a diagnotic test)
Refresh (Refresh the NMEA device list)
Software Version
Build Number
Released
Boot Version
Kernel Version
RootFS Version
Cartography
Chart 1
Serial Number
Program Version
Boot Version
FPGA Version
FPGA Program Version
About OSS
Copyright
PORT/STBD Reversing (ON,
OFF
)
System
Information
Fish Finder
Information
C-Weather Information
Engine Setup
About
Service (For technicians only, requires password)
Clear
Memory
Rudder
Setup
Manual Fuel
Management
IF NMEA
Setup
2
Restore
Defaults
Restore Default Settings (Select Yes/No from pop up window)
Restore All to Factory Defaults (Select Yes/No from pop up window)
Clear All Data and Settings (Select Yes/No from pop up window)