Furuno GP-1650WDF, Installation & Maintenance

Page: 17 / 74

1. INSTALLATION
1-9
Acceptable transducer mounting location
Deep-V hull
• Position 1/2 to 1/3 length of the hull from stern.
• 15 to 30 cm off center line (inside first lifting strakes.)
Transducer mounting location on deep-V hull
High speed V-planning hull
• Within the wetted bottom area
• Deadrise angle within 15
°
Transducer mounting location on high speed V-planning hull
Typical through-hull mount transducer installations
Flat washer
Rubber washer
Fairing block
Hull
bottom
Hull
bottom
Deep-V hull Flat hull
Typical through-hull mount transducer installations