Furuno FR-2135S, Installation Manual

Page: 56 / 82

4-12
10.Fasten the front panel on the display pedestal.
11. Retract the stay to close the display unit.
12.Fasten the right arm cover.
Separate type control head
Necessary parts: RP-26-Z-2E (Code no. 008-491-400)
e m a N e p y T y t Q . o N e d o C
. y s s A e s a C d r a C – 1 –
d r a o B P R 8 9 2 0 P 4 1 1 0 4 6 - 7 8 4 - 8 0 0
B w e r c S d a e H n a P W 0 0 7 2 C 8 x 4 M 1 5 4 4 - 1 8 8 - 0 0 0
B w e r c S d a e H n a P W 0 0 7 2 C 8 x 3 M 2 4 0 4 - 1 8 8 - 0 0 0
A w e r c S d a e H n a P W 0 0 7 2 C 5 x 6 . 2 M 2 3 7 9 - 0 0 8 - 0 0 0
1. Lift the monitor. See Chapter 1 for instructions.
2. Fasten the mounting base with one M4 x 8 screw as below.
Fasten with
M4 x 8 screws.
Fasten with M3 x 8
screws (2 pcs.)
Figure 4-12 Display unit, inside view
3. Fix the mounting base to front panel with two M3 x 8 screws.
4. Set the M-card case lid to the hole in the front panel and fix with two M2.6 x 5
screws.