8. INSTALLATION
8-9
8.7.2
How to show local time or UTC time
You can show UTC time or local time.
1.
Press and hold down the
CALL/MENU
key until the [Setup Menu] appears.
2.
Select [General Setup] with the
CH
knob then press the [SELECT] soft key.
3.
Rotate the
CH
knob to select [Time Area] then press
the [SELECT] soft key.
4.
Rotate the
CH
knob to select [UTC] or [Local] then
press the [ENT] soft key to store the selected setting.
5.
Press the [QUIT] soft key several times to return to ra-
dio operation.
8.7.3
How to set the time notation
Time can be shown in 12-hour or 24-hour format.
1.
Press and hold down the
CALL/MENU
key until the [Setup Menu] appears.
2.
Select [General Setup] with the
CH
knob then press the [SELECT] soft key.
3.
Rotate the
CH
knob to select [Time Display] then press
the [SELECT] soft key.
4.
Rotate the
CH
knob to select [12 Hour] or [24 Hour]
then press the [ENT] soft key to store the selected set-
ting.
5.
Press the [QUIT] soft key several times to return to radio operation.
8.7.4
How to select GPS COG format
The GPS-measured Course Over Ground can be shown in true or magnetic bearing.
1.
Press and hold down the
CALL/MENU
key until the [Setup Menu] appears.
2.
Select [General Setup] with the
CH
knob then press the [SELECT] soft key.
3.
Rotate the
CH
knob to select [Magnetic] then press the
[SELECT] soft key.
4.
Rotate the
CH
knob to select [Magnetic] or [True] then
press the [ENT] soft key to store the selected setting.
5.
Press the [QUIT] soft key several times to return to ra-
dio operation.
www.busse-yachtshop.de | [email protected]
