2. OPERATION
2-9
2.10.2
How to program the scan memory
1.
Press and hold down the
CALL/MENU
key until the [Setup Menu] appears.
2.
Rotate the
CH
knob to select [CH Function Setup].
3.
Press the [SELECT] soft key, then rotate the
CH
knob to select [Scan Memory CH]
then press the [SELECT] soft key.
4.
Rotate the
CH
knob to select a desired channel to be
scanned, then press the [ADD] soft key. [MEM] icon
appears on the display, which indicates the channel
has been programmed to the scan channel.
5.
Repeat step 4 for all the desired channels to be
scanned.
6.
To delete a channel from the list, select the channel then press the [DELETE] soft
key. "MEM" disappears from the display.
7.
When you have completed your selection, press the [QUIT] soft key several times
to return to radio operation.
Note:
You may add/delete the current channel to/from the scan list by pressing the
FUNC
key followed by the
2/MEM
key.
2.10.3
Memory scanning (M-SCAN)
1.
Adjust the
SQL
knob until background noise just dis-
appears.
2.
Press the
FUNC
key followed by the
3/SCAN
key. "M-
SCAN" appears on the display. Scanning starts from
the lowest to the highest programmed channels and
preset channels (described in the next section) and stops on a channel when a
transmission is received.
3.
The channel number blinks during scanning.
4.
To stop scanning, press the
16/9
or
CLR/WX
key, or the
FUNC
key followed by
the
3/SCAN
key.
CH12
CH09
CH01
CH15
CH18
CH22
CH61
CH72
CH68
CH88
www.busse-yachtshop.de | [email protected]
