2. OPERATION
2-13
2.13
Intercom Operation
The intercom function is available if your radiotelephone is equipped with two HS-4721
Handsets.
2.13.1
Communication
1.
Press the
FUNC
key followed by the
5/IC
key to enable
the intercom mode.
2.
Use the
CH
knob to select the intercom to use
([RAM1], [RAM2], or [ALL]), then press the
ENT
key.
When the intercom mode is enabled, "Intercom" is dis-
played on the radio and the HS-4721.
3.
Press the
PTT
switch on the radio. [Talk] appears on the display.
FM-4721’s PTT switch is pressed
HS-4721’s PTT switch is pressed
Note:
A warning beep sounds when the radio’s
PTT
and the Handsets’
PTT
are
pushed at the same time.
4.
Speak slowly and clearly into the microphone. Hold the microphone about 1.5 cm
away from your mouth.
5.
When finished, release the
PTT
switch.
6.
Press the [QUIT] soft key or the
CLR/WX
key to exit the intercom mode and revert
to the radio mode.
www.busse-yachtshop.de | [email protected]
