manualshive.com logo in svg

Furuno FCV-38, Installation Manual

Share
Download
Furuno FCV-38 Installation Manual Download Page 37

3.  INITIAL SETTINGS

3-3

3.2.2

Monitor setting

Set the monitors (main/sub) from the [Service] menu. Select [Shared Settings] on the 
[Service] menu to show the [Shared Settings] menu.

*: The system reboot is required for apply 

the settings. When you apply the cus-
tomized settings, the following confirma-
tion message appears. Click the [Yes] 
button to reboot the system. A buzzer 
sounds during the system reboot be-
cause the communication between the 
processor unit and the trackball control 
unit is disconnected temporarily. The 
buzzer is stopped after completing the 
system reboot.

External Fish Finder Window

If an external monitor and an external fish finder are connected, set the [External Fish 
Finder Window] to [On] to show the independent echo pictures of the external fish find-
er. The setting should be left [Off] (default) while no external monitor is connected.

•  [Off]: The echo pictures for this equipment and external sounder are displayed on 

main monitor.

Item

Setting value

Meaning

[Display 
Resolution 
Switching]

[Auto]
(default)

Show the resolution which is input from the connect-
ed display.

[Manual]

Select the resolution manually for the following 
menu [Display Resolution]

[Display 
Resolution]*

[XGA] (default),
[SXGA],
[UXGA],
[FullHD],
[WUXGA]

Select the appropriate resolution for main monitor.

Note: 

This menu is available when [Manual] is se-

lected at [Display Resolution Switching].

[Sub Monitor 
Display 
Switching]

[Dual]
(default)

The FCV-38 logo is shown on the sub monitor, and 
the graphs etc. can be moved to the sub monitor 
from the main monitor.

[Clone]

The main monitor echo image is shown on the sub 
monitor.

[Sub Monitor 
Position]*

[Off] (default),
[Left],
[Right]

Select the position of sub monitor display in the 
main monitor display.

Note: 

This menu is available when [Dual] is select-

ed at [Sub Monitor Display Switching].

[Sub Monitor 
Display 
Resolution]*

[XGA] (default),
[SXGA],
[UXGA],
[FullHD],
[WUXGA]

Select the appropriate resolution for sub monitor.

Note: 

This menu is available when [Manual] is se-

lected at [Display Resolution Switching].

Summary of Contents for FCV-38


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands