manualshive.com logo in svg

Furuno FCV-38, Installation Manual

Share
Download
Furuno FCV-38 Installation Manual Download Page 29

2.  WIRING

2-9

plied USB cable is connected to USB3.0 port on the processor unit. However, the data 
transfer speed is equivalent to USB 2.0.

Note 4: 

If the USB cable will not be connected to the trackball control unit, attach the 

supplied USB sheet to the USB port on the trackball control unit.

How to extend the control unit cable

To extend the length of the cable between the trackball control unit and the processor 
unit, use the optional cable assembly (6TPSH-XH12X2-LxxSP2, 5/10 m).

1. Unfasten four binding screws (M3

×

8) from the bottom of the unit, and a pan head 

screw (M3

×

8) and flat washer from the back of the unit to remove the cover.

Note: 

Remove the cover slowly to prevent damage to the cables connected to the 

circuit board in the unit.

USB sheet:
Attach this sheet when the USB cable 
between the trackball control unit and 
processor unit is not used.

Binding screw (M3×8, 4 pcs)

Control unit 
cable

Pan head screw  (M3×8)

Flat washer

Control unit cover

Summary of Contents for FCV-38


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands