manualshive.com logo in svg

Furuno FCV-38, Installation Manual

Share
Download
Furuno FCV-38 Installation Manual Download Page 28

2.  WIRING

2-8

DIP switch setting

Set the DIP switches on the HMS board (10P7099) as follows.

2.3

Trackball Control Unit

Connect the control unit cable to the processor unit (J1 or J2). To use the USB port on 
the trackball control unit, connect the unit to either one of the USB ports on the pro-
cessor unit, using the supplied USB cable (TS-20-071-1). Note that the trackball con-
trol unit cannot be operated if only a USB cable is connected on the processor unit. If 
the USB port on the trackball control unit will not be used, the USB connection be-
tween the trackball control unit and processor unit is not required.

Connect a ground wire (IV-1.25sq., local supply) between the ground terminal and 
ship’s ground.

Note 1: 

If the USB cable is connected to the trackball control unit, fasten the USB ca-

ble to the cable tie mount using the supplied cable tie.

Note 2: 

The maximum cable length for USB2.0 is 5 m. To extend the USB cable, the 

optional DVI/USB repeater is required. If you extend the USB cable without the DVI/
USB repeater, the USB device operation is not guaranteed.

Note 3: 

The supplied USB cable and USB port on the trackball control unit do not sup-

port USB3.0. The USB port on the trackball control unit is available, even if the sup-

HMS board 

(10P7093)

DIP 
switch

DIP SW

S1-1

S1-2

S1-3

S1-4

Setting

ON

OFF

OFF

ON

USB cable (TS-20-071-1, 5 m

䠅

Connect with one of the USB ports on the 
processor unit.

Control unit cable

Connect with the processor 
unit (J1 or J2).

Ground terminal

Fasten a ground wire (IV-1.25sq., 
local supply).

Cable tie mount

Fasten the USB cable using 
the supplied cable tie.

Summary of Contents for FCV-38


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands