Furuno FAR-2157, Installation Manual

Page: 36 / 111

2-12
Cable fabrication for the cables connected to the 03P9342 board
Signal cable RW-9600 (Between antenna unit and processor unit)
Power cable TPYC-1.5
Cables for optional equipment (use TTYCS-1 or TTYCS-4, or equivalent)
Shield
Armor
Fasten cable clamp here.
Vinyl tape
Expose cores, and then
wind shield around armor.
Vinyl sheath
Coaxial cable
6
60 450
5
Conductor
5 9
Coaxial cable
14
Fold back shield.
L
Armor
L: According to location
of connector.
6
60: Peel paint
60: Peel paint.
L
5
Shield
Armor
Fasten cable clamp here.
Vinyl tape
Expose cores, and then
wind shield around armor.
L= Depends on equipment
connected. Measure at
processor unit.
6
Conductor
S = 0.75 mm
φ = 1.11 mm
2
TTYCS-1
Armor
Shield
Sheath
φ
=
10.1 mm
Conductor
S = 0.75 mm
φ
= 1.11 mm
2
TTYCS-4
Armor
Shield
Sheath
φ = 16.3
mm