Furuno FAR-2157, Installation Manual

Page: 24 / 111

1-16
1.5 Power Supply Unit
Mounting considerations
The power supply unit may be mounted on a bulkhead or a deck. Because it has no operation
requirements it can be located almost anywhere, provided the location is well ventilated.
Mounting procedure
Fix the unit to the mounting location with four 6×20 self-tapping screws (local supply). For
mounting on a bulkhead, do the following:
1. Mark location for mounting holes.
2. Screw in the self-tapping screws at the location for the bottom fixing holes, leaving a gap of
about 5 mm between the bottom of the screw head and bulkhead.
3. Set the unit to the screws inserted at step 1.
4. Fasten the self-tapping screws at the top of the unit.
5. Tighten all self-tapping screws.
Mounting dimensions for power supply unit
240
±
1
420
±
1
2- φ 7
FIXING
HOLE
TERMINAL
GND
TERMINAL
#: MAINTENANCE SPACE
WINDOW
LED
440
#50
(11)
R3.5
7
240
±
1
TERMINAL
9