background image

3. ARP OPERATION 

 

3-15

  [TARGET LIST (1/1)] 
    SORT BY CPA 
 
1 BACK 
2 ARP TARGET 
 No: 

001 

  BRG 16.5°T    RNG 2.05 NM
 CPA 

0.17NM 

TCPA>99.59M

3 ARP TARGET 
 No: 

002 

  BRG 19.0°T    RNG 2.49 NM
 CPA 

0.29NM 

TCPA>99.59M

 
 
 
 
 
 
 
9 REFRESH DATA 

3.8.2 Target 

list 

The target list provides a comprehensive data display of all ARP (and AIS) 
targets being tracked.   
 

Displaying the target list 

To display the target list, do the following: 
 
1.  Roll the trackball to choose the TARGET LIST box at the right side of the 

screen. 

  

TARGET

LIST

 

TARGET LIST box 

2.  Push the left button to display the TARGET LIST. “>” in the TCPA means that 

the time is greater than 99:59. 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Target list 

3.  To scroll the list when there are more than three targets, select 0 NEXT and 

then push the wheel or the left button. 

Note:

 To refresh data, choose 9 REFRESH DATA and then push the wheel. 

This is not necessary when the sorting method is changed (see next 
page); data is automatically updated whenever the sorting method is 
changed. 

4.  Push the right button to close the list. 
 

Summary of Contents for FAR-21 7-BB Series


















































































































































































































































































































Reviews: