Furuno CSH-8LMARK-2, Installation Manual

Page: 38 / 85

2. WIRING
2-12
Display unit
Prepare a XGA display locally. When using MU-150HD as the display unit, refer to its
operator’s manual. Connect the processor unit and display with the monitor cable
3COX-2P-6C 5 m or 10 m (supplied). Use the MONITOR 1 port for a display unit.
NMEA/CIF
NMEA input sentence
*1: GPS navaid, Loran-C, II (other talker), TR
*2: GPS navaid, Loran-C, II (other talker), TR, VD
*3: GPS navaid, II (other talker), TR
**: Not specified
NMEA output sentence
CIF input sentence
Talker Sentence Information
*1 GAA GPS position data
*1 GLL Own ship position
** GTD Own ship position (TD, LOP)
LC GLC TD (Loran-C)
** HDG Heading (compass)
** HDM Heading (magnetic bearing)
** HDT Heading (true)
*2 VTG Course over ground speed
VD VHW Water speed, heading
LC RMA Recommended minimum specific Loran-C data
*3 RMC Recommended minimum specific GPS data
** DBT Depth below transducer, Ver. 1.5
** DBS Depth below sea level
** DPT Depth below transducer plus offset value, Ver. 2.0
** MTW Water temperature
VD VDR Water current, single layer
VD CUR Water current, multi-layers
Talker Sentence Information
SS TTL Target position (L/L)
Data No. Information
21 DR position
24 Loran-C position
28 GPS position
54 Loran-C, TD
4: Heading (true)
41 DR ship’s speed and course
44 Loran-C ship’s speed and course
48 GPS ship’s speed and course
57 Depth of sea bottom
58 Water temperature
66 Current indicator ship’s speed and course