Furuno CSH-8LMARK-2, Installation Manual

Page: 25 / 85

1. MOUNTING
1-17
1.6 Transducer Cable Extension Kit CSH-1700
(Optional Junction Box)
This optional kit provides for extension of the transducer cable by 6.6 m, and can be
mounted on a deck or the bulkhead. Determine mounting location considering length
of cable assy. Maintenance space around the unit should be as shown below.
Name: Transducer cable extension kit, Type: CSH-1700, Code No.: 000-068-207
Junction box
1.7 Motion Sensor MS-100 (option)
The optional motion sensor MS-100 measures ship’s pitching and rolling angles with
a sensor, using the principles of the gyrocompass. Because it is free from error caused
by ship’s vertical and horizontal motion, it can be installed at any convenient location.
However, ship’s semi-permanent inclination due to loading imbalance be detected.
1.7.1 Mounting considerations
• Vibration in the mounting area should the minimal.
• Locate the unit away from areas subject to water splash.
• The ambient temperature should not exceed 50°C.
Name Type Code No. Qty
Junction box CSH-1700 006-800-000 1
Cable assy 10S1950 000-141-817 6.6 m
100 mm
100 mm
200 mm
100 mm