manualshive.com logo in svg

Furuno CSH-7, Operator'S Manual

The Furuno CSH-7 Operator's Manual is available for free download on our website. This comprehensive manual provides detailed instructions and information on operating the Furuno CSH-7 device. Download your free copy today at manualshive.com and unlock the full potential of your product.

Share
Download
background image

 ii

TABLE OF CONTENTS

FOREWORD

A Word to CSH-7 Owners ........................................................................................................ v
Features ..................................................................................................................................... v
System Configuration .............................................................................................................. vi

OPERATIONAL OVERVIEW

Equipment Overview ............................................................................................................. 1-1
Display Unit Control Panel Description ................................................................................1-2
Turning the Power On/Off ..................................................................................................... 1-2
Adjusting Screen Brilliance, Control Panel Backlighting ..................................................... 1-3
Lowering the Transducer .......................................................................................................1-3
Selecting a Display Range ..................................................................................................... 1-3
Setting the Tilt Angle ............................................................................................................. 1-3
Adjusting the Gain ................................................................................................................. 1-7

MARKERS AND DATA

Standard Markers and Data ...................................................................................................2-1
Optional Markers and Data ....................................................................................................2-3

MENU OVERVIEW

Scan Menu Operation ............................................................................................................3-1
Menu-1, Menu-2, System Menu Operation ...........................................................................3-4

FINE TUNING THE PICTURE

Eliminating Unwanted Feeble Echoes ...................................................................................4-1
Displaying Surface Fish Clearly ............................................................................................4-2
Suppressing Seabed Tail ........................................................................................................4-2
Suppressing Seabed and Sea Surface Reflections in Shallow Waters ................................... 4-3
Rejecting Sonar Interference and Noise ................................................................................4-4

ADVANCED OPERATION

Measuring the Range and Bearing to a Target .......................................................................5-1
Detecting Fish Schools Aurally ............................................................................................. 5-1
Relocating Fish School for Easy Observation .......................................................................5-2
Function Keys (F1, F2) .......................................................................................................... 5-3
Event Markers, Own Ship Event Markers ............................................................................. 5-5

Summary of Contents for CSH-7




















































Reviews:

No comments

Related manuals for CSH-7

Sonavision 2392 mercury User Manual preview
2392 mercury
Brand: Sonavision Pages: 19

Brands by name

Popular brands

Load more brands