manualshive.com logo in svg

Furuno CSH-53, Installation Manual

The Furuno CSH-53 is a comprehensive installation manual for this high-performance navigational system. This manual provides step-by-step instructions and detailed diagrams to ensure easy installation. Download the free manual from our website to unlock the full potential of your Furuno CSH-53.

Share
Download
background image

10

3.3 Mounting the Transmitter Unit

The transmitter unit can be mounted with or without mounting legs. For use without mounting
legs remove them and use inside mounting holes.

The transmitter unit should be reinforced against vibration by stays extending from the eye-
bolts on the top of the unit.

Attach stay to
this eye bolt.

Mounting leg for
outside leg mounting

For mounting without legs,
remove legs and use inside
holes for mounting.

Figure 3-9 Transmitter unit

3.4 Mounting the Interface Unit

Since the interface unit connects with several navigation and fishing equipment, determine the
installation site with the wirings to them taken into account. In addition, since the unit incorpo-
rates a data selector and self-check switch, select a place where they can be easily operated.

Summary of Contents for CSH-53











































































Reviews:

No comments

Related manuals for CSH-53

Wassp WMB-160F Installation Manual preview
WMB-160F
Brand: Wassp Pages: 68
Eagle Fish ID 128 Installation And Operation Instructions Manual preview
Fish ID 128
Brand: Eagle Pages: 32

Brands by name

Popular brands

Load more brands