Furuno BBDS1, Operator'S Manual

Page: 17 / 40

1. MOUNTING
8
1.5 Optional Triducers
1.5.1 Thru-hull triducer
525STID-MSD
See section 1.4 for how to install the 525STID-MSD.
525T-BSD/526TID-HDD
For details of the installation, see the manual of the triducer.
1.5.2 Transom route triducer
525T-BSD/526TID-HDD
For details of the installation, see the manual of the triducer.
525STID-PWD
79 mm
(3.1”)
Thread
133 mm
(5.2”)
51 mm
(2.0”)
7mm (0.3”)
140 mm
(5.5”) 27 mm
(1.1”)
Height to the screw
BOW
CAUTION CAUTION
Do not install the triducer in the following
locations:
●
Near any water drain or vent
●
Near overhangs, braces, or behind fixtures
●
Near any unstable area of the ship’s bottom
●
Near any areas with peeling paint
Do not install the triducer where it can be a
hindrance during any of the following times:
●
When pulling a trailer
●
When launching
●
When being towed
●
When ship is in drydock