1/25/2016
Page | 10
DGOI-C 64 ASSEMBLY INSTRUCTIONS
C16AK0001, Issue 1
3.5. Input Cables Installation
Fig. 13
Open 2.5 m of the cable and reserve fiber unit(s) to accommodate the fibers within the
enclosure
Insert the cable in the rubber cable entry port.
When preparing the cable leave 60 mm of strength member (FRP
– Strength member) for
anchoring the cable
Insert the strength member in the position and tighten the bracket screw to secure the
cable (Fig. 14);
Fig. 14 Support for anchoring FRP (strength member)
