21
• Using index finger, slowly and gently depress trigger to perform the cleave
process. The cleave process is complete when the fiber snaps away from the
connector. Do not release trigger!
• Before releasing the trigger, remove the connector from the cleave tool and
grasp the top of the scrap fiber while releasing the trigger. Gently remove the
scrap fiber while keeping it away from the diamond blade.
• Dispose of scrap fiber safely in a hard-sided container.
• Install protective cap onto connector to protect cleaved fiber surface.
888 438 9936 (US & Canada) or 860 678 0371 | [email protected] | www.SpecialtyPhotonics.com
