888 438 9936 (US & Canada) or 860 678 0371 | [email protected] | www.SpecialtyPhotonics.com
11
• Insert the buffered fiber through the guide tube of the fiber
stripper until the sub unit outer jacket bottoms out inside the
tube.
• Holding cable securely, squeeze handles to cut buffer and
PULL straIGHt
to remove buffer.
• Inspect HCS cladding for damage from improper buffer
stripping. (i.e. white dusty stripe)
• Verify proper buffer strip length against the
strip template shown on page 7.
NOTE:
If damage is visible cut off the damaged
fiber and repeat the procedure from
Step 2: Strip Cable Outer Jacket.
Approx
imately
1
/
8
"
Maxim
um
1
/
4
"
